 |
Ohio Administrative Code (Last Updated: January 12, 2021) |
 |
1501:9 Division of Mineral Resources Management - Oil and Gas |
|
Chapter1501:9-11. Plugging of Wells |
1501:9-11-10. Cutting off conductor pipe or surface casing below grade; identification tag
Latest version.
-
(A) When the plugging operations have been completed, a person has to cut off the remaining casing in the well to a minimum of thirty inches below the surface of the grade. The chief may grant exceptions to this rule including allowing the person to delay cutoff until all wells on a horizontal well site have been plugged.
(B) No sooner than three business days after emplacing the uppermost plug, a plate with an identification tag has to be tack-welded or attached on the top of the remaining casing. If the landowner signs a waiver, casing may be left in place, not less than thirty inches above grade, with an identification tag.