 |
Ohio Administrative Code (Last Updated: January 12, 2021) |
 |
4733 State Board of Registration for Professional Engineers and Surveyors |
|
Chapter4733-38. Standards For Mortgage Location Surveys |
4733-38-04. Measurement specifications
-
All measurements shall be made in accordance with the following specifications:
(A) The professional surveyor shall keep his equipment in such repair and adjustment as to conform to the provisions of paragraph (A) of rule 4733-37-04 of the Administrative Code.
(B) Every measurement of distance shall be made either directly or indirectly in such a manner that the linear error in the reported distance shall not exceed:
(1) Two-tenths of a foot for major improvements [see paragraph (G) of rule 4733-38-05 of the Administrative Code].
(2) One-half of a foot for major improvement location [see paragraph (J) of rule 4733-38-05 of the Administrative Code].
When a case arises wherein a greater linear error will not create ambiguity of locations (i.e., tracts where the improvements are located substantial distances from boundaries), then the professional surveyor may use a greater linear error, provided the tolerance is clearly indicated on the survey plat (e.g., 500 feet +/- 5 feet).