4101:2-15-01 Referenced standards.
General. This chapter lists the codes and standards that are referenced in various sections of the mechanical code. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and the title. The application of the referenced standards shall be as specified in Section 102.4 of the building code.
Referenced codes: When indicated in this code, the following codes refer to provisions in the listed chapters of the Administrative Code:
Referenced code
Ohio Administrative Code chapters
Building Code
4101:1-1 to 4101:1-35
Fire Code
1301:7-1 to 1301:7-7
Ohio Boiler and Pressure Vessel Rules
4101:4-1 to 4101:4-10
Plumbing Code
4101:3-1 to 4101:3-13
Referenced Standards.
Air Conditioning Contractors of America 1712 New Hampshire Ave, NW Washington, DC 20009
ACCA
Standard Reference
Number Title
Manual D-95 Residential Duct Systems
American National Standards Institute 11 West 42nd Street
New York, NY 10036
ANSI
Standard Reference
Number Title
Z21.8-1994 (R2002) Installation of Domestic Gas Conversion Burners
Air-Conditioning and Refrigeration Institute
Suite 425
4301 North Fairfax Drive Arlington, VA 22203
ARI
Standard Reference Number Title
700-99 Purity Specifications for Fluorocarbon and Other Refrigerants
American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. 1791 Tullie Circle, NE
Atlanta, GA 30329-2305
ASHRAE
Standard Reference
Number Title
Handbook - 2005 Fundamentals Handbook-2004 HVAC Systems and Equipment
15-2004 Safety Standard for Refrigeration Systems
34-2004 Designation and Safety Classification of Refrigerants
62.1-2004 Ventilation for Acceptable Indoor Air Quality
62.2-2004 Ventilation for Acceptable Indoor Air Quality in Low-Rise Residential Buildings
American Society of Mechanical Engineers Three Park Avenue
New York, NY 10016-5990
ASME
Standard Reference
Number Title
B1.20-1983 (R2001) Pipe Threads, General Purpose (Inch) B16.3-1998 Malleable Iron Threaded Fittings, Classes 150 &
300
B16.5-2003 Pipe Flanges and Flanged Fittings NPS ½ through NPS 24- With B16.5a1998 Addenda
B16.9-2003 Factory Made Wrought Steel Buttwelding Fittings B16.11-2001 Forged Fittings, Socket-welding and Threaded
B16.15-1985 (R2004) Cast Bronze Threaded Fittings
B16.18-2001 Cast Copper Alloy Solder Joint Pressure Fittings B16.22-2001 Wrought Copper and Copper Alloy Solder Joint
Pressure Fittings-with B16.22a-1998 Addenda B16.23-2002 Cast Copper Alloy Solder Joint Drainage Fittings
DWV
B16.24-2001 Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500 and 2500
B16.26-1988 Cast Copper Alloy Fittings for Flared Copper Tubes B16.28-1994 Wrought Steel Buttwelding Short Radius Elbows
and Returns
B16.29-2001 Wrought Copper and Wrought Copper Alloy Solder
Joint Drainage Fittings-DWV
BPVC-2004 Boiler & Pressure Vessel Code (Sections I and IV)
BPVC Section IX-2004 Welding and Brazing Qualifications
CSD-1-2002 Controls and Safety Devices for Automatically Fire Boilers
American Society of Sanitary Engineering 28901 Clemens Road, Suite A
Westlake, OH 44145
ASSE
Standard Reference
Number Title
1017- 03 Temperature Actuated Mixing Valves for Hot Water Distribution Systems
ASTM International 100 Barr Harbor Drive
West Conshohocken, PA 19428
ASTM
Standard Reference
Number Title
A 53/A 53M-04a Specification for Pipe, Steel, Black and Hot-dipped, Zinc- coated Welded and Seamless
A 106/A106M-04b Specification for Seamless Carbon Steel Pipe for High-
temperature Service
A 126-04 Specification for Gray Iron Castings for Valves, Flanges and Pipe Fittings
A 254-97(2002) Specification for Copper Brazed Steel Tubing
A 420/A 420M-04 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-temperature Service
A 539-99 Specification for Electric-resistance-welded Coiled Steel Tubing for Gas and Fuel Oil Lines
B 32-04 Specification for Solder Metal
B 42-02?1 Specification for Seamless Copper Pipe, Standard Sizes3 B 43-98 (2004) Specification for Seamless Red Brass Pipe, Standard Sizes B 68-02 Specification for Seamless Copper Tube, Bright Annealed B 75-02 Specification for Seamless Copper Tube
B 88-03 Specification for Seamless Copper Water Tube B 135-02 Specification for Seamless Brass Tube
B 251-02?1 Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube
B 280-03 Specification for Seamless Copper Tube for Air
Conditioning and Refrigeration Field Service
B 302-02 Specification for Threadless Copper Pipe, Standard Sizes B 813-00 ?1 Specification for Liquid and Paste Fluxes for Soldering of
Copper and Copper Alloy Tube
C 315-02 Specification for Clay Flue Linings
C 411-04 Test Method for Hot-surface Performance of High-
temperature Thermal Insulation
D 56-02a Test Method for Flash Point by Tag Closed Tester
D 93-02a Test Method for Flash Point of Pensky-Martens Closed Cup Tester
D 1527-99 ?1 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
D 1693-01 Test Method for Environmental Stress-cracking of Ethylene Plastics
D 1785-04a Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe, Schedules 40, 80 and 120
D 2235-04 Specifications for Solvent Cement for Acrylonitrile-
Butadiene-Styrene (ABS) Plastic Pipe and Fittings
D 2241-04b Specification for Poly (Vinyl Chloride)(PVC) Pressure- rated Pipe (SDR-Series)
D 2282-99 ?1 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)
D 2412-02 Test Method for Determination of External Loading
Characteristics of Plastic Pipe by Parallel-plate Loading
D 2447-03 Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
D 2466-02 Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 40
D 2467-04?1 Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 80
D 2468-96a Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40
D 2513-04a Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
D 2564-04 Specification for Solvent Cements for Poly (Vinyl
Chloride) (PVC) Plastic Piping Systems
D 2683-04 Specification for Socket-type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
D 2837-04 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
D 2846/D2846M-99 ?1Specification for Chlorinated Poly (Vinyl Chloride)
(CPVC) Plastic Hot and Cold Water Distribution Systems D 2996-01 Specification for Filament-wound Fiberglass (Glass Fiber
Reinforced Thermosetting Resin) Pipe
D 3035-03a Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
D 3278-96(2004)?1 Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus
D 3309-96a (2002) Specification for Polybutylene (PB) Plastic Hot and Cold Water Distribution Systems
D 3350-04 Specification for Polyethylene Plastics Pipe and Fittings Materials
E 84-05 Test Method for Surface Burning Characteristics of
Building Materials
E 119-00a Test Method for Fire Tests of Building Construction and Materials
E 136- 04 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
E 814-02 Test Method for Fire Tests of Through-Penetration Fire Stops
E 1509-04 Specification for Room Heaters, Pellet Fuel-burning Type E 2231-02 Standard Practice For Specimen Preparation and Mounting
of Pipe and Duct Insulation Materials to Assess Surface
Burning Characteristics
E 2336-04 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
F 438-04 Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
F 439-02 ?1 Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F 441/F 441M-02 Specification for Chlorinated Poly (Vinyl Chloride)
(CPVC) Plastic Pipe, Schedules 40 and 80
F 442/F 442M-99 Specification for Chlorinated Poly (Vinyl Chloride)
(CPVC) Plastic Pipe (SDR-PR)
F 493-04 Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC)
Plastic Pipe and Fittings
F 876-04 Specification for Crosslinked Polyethylene (PEX) Tubing F 877-05 Specification for Crosslinked Polyethylene (PEX) Plastic
Hot and Cold Water Distribution Systems
F 1055-98?1 Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter
Controlled Polyethylene Pipe and Tubing F 1281-03 Specification for Crosslinked
Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
F 1476-95a Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
F 1974-04 Standard Specification for Metal Insert Fittings for
Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
American Welding Society 550 N.W. LeJeune Road P.O. Box 351040
Miami, FL 33135
AWS
Standard Reference Number Title
A5.8-2004 Specifications for Filler Metals for Brazing and Braze Welding
Consumer Product Safety Commission
4330 East West Highway Bethesda, MD 20814
CPSC
Standard Reference
Number Title
16CFR Part 1500.44-2001 Method for Testing Extremely Flammable and Flammable Solids
Canadian Standards Association 178 Rexdale Blvd.
Rexdale (Toronto), Ontario, Canada M9W 1R3
CSA
Standard Reference
Number Title
CAN/CSA B137.10M-02 Cross-linked Polyethylene/Aluminum/Cross-linked
Polyethylene Composite Pressure Pipe Systems CSA America FC1-03 Stationary Fuel Cell Power Systems
Department of Labor
Occupational Safety and Health Administration c/o Superintendent of Documents
US Government Printing Office Washington, DC 20402-9325
DOL
Standard Reference
Number Title
29 CFR Part 1910.1000 (1974) Air Contaminants 29 CFR Part 1910. 1025 (2006) Lead
Federal Specifications*
General Services Administration 7th & D Streets
Specification Section, Room 6039 Washington, DC 20407
FS
Standard Reference
Number Title
WW-P-325B (1976) Pipe, Bends, Traps, Caps and Plugs; Lead (for Industrial Pressure and Soil and Waste Applications
*Standards are available from the Supt. of Documents, U.S. Government Printing Office, Washington, DC 20402-9325.
International Code Council 5203 Leesburg Pike, Suite 600 Falls Church, VA 22041-3401
ICC
Standard Reference
Number Title
IFC-06 International Fire Code® IFGC-06 International Fuel Gas Code®
International Institute of Ammonia Refrigeration Suite 700
1101 Connecticut Ave., NW Washington, DC 20036
IIAR
Standard Reference Number Title
2-99 Fibrous Glass Duct Construction Standards Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems
Manufacturers Standardization Society of the Valve & Fittings Industry, Inc. 127 Park Street, N.E.
Vienna, VA 22180
MSS
Standard Reference
Number Title
SP-69-2003 Pipe Hangers and Supports-Selection and Application
North American Insulation Manufacturers Association Suite 310
44 Canal Center Plaza Alexandria, VA 22314
NAIMA
Standard Reference
Number Title
AH116-02 Fibrous Glass Duct Construction Standards
National Fire Protection Association Batterymarch Park
Quincy, MA 02269
NFPA
Standard Reference Number Title
30A-03 Code for Motor Fuel-dispensing Facilities and Repair Garages 31-06 Installation of Oil-burning Equipment
37-06 Stationary Combustion Engines and Gas Turbines 58-04 Liquefied Petroleum Gas Code
69-02 Explosion Prevention Systems
70-05 National Electrical Code (including TIA 05-2)
72-02 National Fire Alarm Code
75-03 Protection of Information Technology Equipment
82-04 Incinerators and Waste and Linen Handling Systems and Equipment
85-04 Boiler and Combustion Systems Hazards Code
91-04 Exhaust Systems for Air Conveying of Vapors, Gases, Mists and Noncombustible Particulate Solids
92B-05 Smoke Management Systems in Malls, Atria and Large Spaces 211-06 Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances 262-02 Standard Method of Test for Flame Travel and Smoke of Wires
and Cables for Use in Air-handling Spaces
704-01 Identification of the Hazards of Materials for Emergency Response 853-03 Installatin of Stationary Fuel Power Plants
Sheet Metal & Air Conditioning Contractors National Assoc., Inc. 4021 Fafayette Center Road
Chantilly, VA 22021
SMACNA
Standard Reference
Number Title
SMACNA-05 HVAC Duct Construction Standards-Metal and Flexible SMACNA-03 Fibrous Glass Duct Construction Standards
Underwriters Laboratories, Inc. 333 Pfingsten Road Northbrook, IL 60062-2096
UL
Standard Reference
Number Title
17-94 Vent or Chimney Connector Dampers for Oil-fired Appliances-with Revisions through September 1998
103-01 Factory-built Chimneys, Residential Type and Building Heating Appliance
127-96 Factory-built Fireplaces-with Revisions through November 1999
174-04 Household Electric Storage Tank Water Heaters
181-05 Factory-made Air Ducts and Air Connectors
181A-05 Closure Systems for Use with Rigid Air Ducts and Air Connectors-with Revisions through December 1998
181B-05 Closure Systems for Use with Flexible Air Ducts and Air Connectors
207-01 Refrigerant-containing Components and Accessories, Nonelectrical
268-96 Smoke Detectors for Fire Prevention Signaling Systems- with Revisions through January 1999
268A-98 Smoke Detectors for Duct Applications-with Revisions through September 2001
343-97 Pumps for Oil-Burning Appliances-with Revisions through May 2002
391-95 Solid-fuel and Combination-fuel Central and Supplementary Furnaces-with Revisions through May 1999
412-04 Refrigeration Unit Coolers
471-06 Commercial Refrigerators and Freezers 508-99 Industrial Control Equipment
536-97 Flexible Metallic Hose-with Revisions through June 2003 555-99 Fire Dampers-with Revisions through January 2002
555C-96 Ceiling Dampers
555S-99 Smoke Dampers-with Revisions through April 2003 586-96 High-efficiency, Particulate, Air Filter Units-with
Revisions through August 2004
641-95 Type L Low-temperature Venting Systems-with Revisions through April 1999
710-95 Exhaust Hoods for Commercial Cooking Equipment-with Revisions through April 1999
710B-04 Recirculating Systems
726-95 Oil-fired Boiler Assemblies-with Revisions through January 2001
727-06 Oil-fired Centeral Furnaces 729-03 Oil-fired Floor Furnaces 730-03 Oil-fired Wall Furnaces
731-95 Oil-fired Unit Heaters-with Revisions through May 2004 732-95 Oil-fired Storage Tank Water Heaters-with Revisions
through January 1999
737-96 Fireplace Stoves-with Revisions through January 2000 762-03 Outline of Investigation for Power Ventilators for
Restaurant Exhaust Appliances
791-93 Residential Incinerators-with Revisions through May 1998
834-04 Heating, Water Supply and Power Boilers Electric
867-00 Electrostatic Air Cleaners-with Revisions through May 2004
896-93 Oil-burning Stoves-with Revisions through May 2004 900-94 Air Filter Units-with Revisions through October 1999 959-01 Medium Heat Appliance Factory-built Chimneys
1240-05 Electric Commercial Clothes Drying Equipment
1261-01 Electric Water Heaters for Pools and Tubs-with Revisions through June 2004
1453-04 Electronic Booster and Commercial Storage Tank Water Heaters
1482-96 Solid-fuel Type Room Heaters-with Revisions through January 2000
1777-04 Chimney Liners
1820-04 Fire Test of Pneumatic Tubing for Flame and Smoke
Characteristics
1887-04 Fire Tests of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics
1978-05 Grease Ducts
1995-05 Heating and Cooling Equipment
2043-96 Fire Test for Heat and Visible Smoke Release for Discrete Products and their Accessories Installed in Air-handling Spaces-with Revisions through June 2001
2158-97 Outline of Investigation Electric Clothes Dryer-with Revisions through May 2004
2162-01 Outline of Investigation for Commercial Wood-fired Baking Ovens-Refractory Type
2221-01 Tests of Fire Resistive Grease Duct Enclosure Systems
Replaces: 4101:2-15-01.1, 4101:2-15-01.2, 4101:2-15-01.3
Effective: 07/01/2007
R.C. 119.032 review dates: 07/01/2012
CERTIFIED ELECTRONICALLY
Certification
02/02/2007
Date
Promulgated Under: 119.03
Statutory Authority: 3781.10(A)
Rule Amplifies: 3781.10, 3781.11, 3791.04
Prior Effective Dates: 7/1/82, 3/1/85, 3/1/86, 1/1/89, 9/1/92, 7/1/95, 2/1/96,
3/1/98, 7/1/98, 1/1/02, 1/1/04, 3/1/05, 9/6/05, 3/1/06
Document Information
- Effective Date:
- 7/1/2007
- File Date:
- 2007-02-02
- Last Day in Effect:
- 2007-07-01
- Rule File:
- 4101$2-15-01_PH_FF_N_RU_20070202_1319.pdf
- Related Chapter/Rule NO.: (1)
- Ill. Adm. Code 4101:2-15-01. Referenced standards