4101:2-15-01 Referenced standards.

 

 

 

 

 

 

4101:2-15-01   Referenced standards.

 

                                                                          General. This chapter lists the codes and standards that are referenced in various sections of the mechanical code. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and the title. The application of the referenced standards shall be as specified in Section 102.4 of the building code.

 

                                                                          Referenced codes: When indicated in this code, the following codes refer to provisions in the listed chapters of the Administrative Code:

 

Referenced code	Ohio Administrative Code chapters
Building Code	4101:1-1 to 4101:1-35
Fire Code	1301:7-1 to 1301:7-7
Ohio Boiler and Pressure Vessel Rules	4101:4-1 to 4101:4-10
Plumbing Code	4101:3-1 to 4101:3-13

 

                        Referenced Standards.

 

Air Conditioning Contractors of America 1712 New Hampshire Ave, NW Washington, DC 20009

 

ACCA

Standard Reference

Number                      Title

Manual D-95               Residential Duct Systems

 

American National Standards Institute 11 West 42nd Street

New York, NY 10036

 

ANSI

Standard Reference

Number                                  Title

Z21.8-1994 (R2002)             Installation of Domestic Gas Conversion Burners

 

 

 

 

 

 

 

 

 

 

 

 

Air-Conditioning and Refrigeration Institute Suite 425

4301 North Fairfax Drive Arlington, VA 22203

ARI

Standard Reference Number   Title

700-99          Purity Specifications for Fluorocarbon and Other Refrigerants

American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. 1791 Tullie Circle, NE

Atlanta, GA 30329-2305

ASHRAE

Standard Reference

Number                      Title

Handbook - 2005       Fundamentals Handbook-2004            HVAC Systems and Equipment

15-2004                    Safety Standard for Refrigeration Systems

34-2004                    Designation and Safety Classification of Refrigerants

62.1-2004                    Ventilation for Acceptable Indoor Air Quality

62.2-2004                    Ventilation for Acceptable Indoor Air Quality in Low-Rise Residential Buildings

American Society of Mechanical Engineers Three Park Avenue

New York, NY 10016-5990

ASME

Standard Reference

Number                                  Title

B1.20-1983 (R2001)            Pipe Threads, General Purpose (Inch) B16.3-1998        Malleable Iron Threaded Fittings, Classes 150 &

300

B16.5-2003                             Pipe Flanges and Flanged Fittings NPS ½ through NPS 24- With B16.5a1998 Addenda

B16.9-2003                             Factory Made Wrought Steel Buttwelding Fittings

B16.11-2001                           Forged Fittings, Socket-welding and Threaded B16.15-1985 (R2004)                                   Cast Bronze Threaded Fittings

B16.18-2001                           Cast Copper Alloy Solder Joint Pressure Fittings B16.22-2001                                                Wrought Copper and Copper Alloy Solder Joint

Pressure Fittings-with B16.22a-1998 Addenda B16.23-2002 Cast Copper Alloy Solder Joint Drainage Fittings

DWV

B16.24-2001                           Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500 and

2500

B16.26-1988                           Cast Copper Alloy Fittings for Flared Copper Tubes B16.28-1994                                                Wrought Steel Buttwelding Short Radius Elbows

and Returns

B16.29-2001                           Wrought Copper and Wrought Copper Alloy Solder

Joint Drainage Fittings-DWV

BPVC-2004                         Boiler & Pressure Vessel Code (Sections I and IV)

BPVC Section IX-2004           Welding and Brazing Qualifications

CSD-1-2002                            Controls and Safety Devices for Automatically Fire Boilers

American Society of Sanitary Engineering 28901 Clemens Road, Suite A

Westlake, OH 44145

ASSE

Standard Reference

Number                      Title

1017- 03                    Temperature Actuated Mixing Valves for Hot Water Distribution Systems

ASTM International 100 Barr Harbor Drive

West Conshohocken, PA 19428

ASTM

Standard Reference

Number                      Title

A 53/A 53M-04a        Specification for Pipe, Steel, Black and Hot-dipped, Zinc- coated Welded and Seamless

A 106/A106M-04b      Specification for Seamless Carbon Steel Pipe for High- temperature Service

A 126-04                     Specification for Gray Iron Castings for Valves, Flanges and Pipe Fittings

A 254-97(2002)          Specification for Copper Brazed Steel Tubing

A 420/A 420M-04           Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-temperature Service

A 539-99                          Specification for Electric-resistance-welded Coiled Steel Tubing for Gas and Fuel Oil Lines

B 32-04                       Specification for Solder Metal

B 42-02?1                          Specification for Seamless Copper Pipe, Standard Sizes3  B 43-98 (2004)                                    Specification for Seamless Red Brass Pipe, Standard Sizes B 68-02                                         Specification for Seamless Copper Tube, Bright Annealed B 75-02                                           Specification for Seamless Copper Tube

B 88-03                       Specification for Seamless Copper Water Tube

B 135-02                     Specification for Seamless Brass Tube

B 251-02?1                        Specification for General Requirements for Wrought Seamless Copper and Copper-alloy Tube

B 280-03                     Specification for Seamless Copper Tube for Air

Conditioning and Refrigeration Field Service

B 302-02                     Specification for Threadless Copper Pipe, Standard Sizes B 813-00 ?1                                                Specification for Liquid and Paste Fluxes for Soldering of

Copper and Copper Alloy Tube

C 315-02                     Specification for Clay Flue Linings

C 411-04                     Test Method for Hot-surface Performance of High-

temperature Thermal Insulation

D 56-02a                     Test Method for Flash Point by Tag Closed Tester

D 93-02a                     Test Method for Flash Point of Pensky-Martens Closed Cup Tester

D 1527-99 ?1                    Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80

D 1693-01                        Test Method for Environmental Stress-cracking of Ethylene Plastics

D 1785-04a                 Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe, Schedules 40, 80 and 120

D 2235-04                   Specifications for Solvent Cement for Acrylonitrile-

Butadiene-Styrene (ABS) Plastic Pipe and Fittings

D 2241-04b                 Specification for Poly (Vinyl Chloride)(PVC) Pressure- rated Pipe (SDR-Series)

D 2282-99 ?1                    Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR)

D 2412-02                   Test Method for Determination of External Loading

Characteristics of Plastic Pipe by Parallel-plate Loading

D 2447-03                        Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter

D 2466-02                   Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 40

D 2467-04?1                     Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 80

D 2468-96a                 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40

D 2513-04a                 Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings

D 2564-04                   Specification for Solvent Cements for Poly (Vinyl

Chloride) (PVC) Plastic Piping Systems

D 2683-04                   Specification for Socket-type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

D 2837-04                   Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials

D 2846/D2846M-99 ?1Specification for Chlorinated Poly (Vinyl Chloride)

(CPVC) Plastic Hot and Cold Water Distribution Systems D 2996-01                                    Specification for Filament-wound Fiberglass (Glass Fiber

Reinforced Thermosetting Resin) Pipe

D 3035-03a                 Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

D 3278-96(2004)?1       Test Methods for Flash Point of Liquids by Small Scale Closed-cup Apparatus

D 3309-96a (2002)      Specification for Polybutylene (PB) Plastic Hot and Cold Water Distribution Systems

D 3350-04                   Specification for Polyethylene Plastics Pipe and Fittings Materials

E 84-05                       Test Method for Surface Burning Characteristics of

Building Materials

E 119-00a                    Test Method for Fire Tests of Building Construction and Materials

E 136- 04                    Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C

E 814-02                     Test Method for Fire Tests of Through-Penetration Fire Stops

E 1509-04                   Specification for Room Heaters, Pellet Fuel-burning Type E 2231-02                                    Standard Practice For Specimen Preparation and Mounting

of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

E 2336-04                   Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

F 438-04                      Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

F 439-02 ?1                        Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

F 441/F 441M-02        Specification for Chlorinated Poly (Vinyl Chloride)

(CPVC) Plastic Pipe, Schedules 40 and 80

F 442/F 442M-99        Specification for Chlorinated Poly (Vinyl Chloride)

(CPVC) Plastic Pipe (SDR-PR)

F 493-04                      Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC)

Plastic Pipe and Fittings

F 876-04                      Specification for Crosslinked Polyethylene (PEX) Tubing F 877-05                                    Specification for Crosslinked Polyethylene (PEX) Plastic

Hot and Cold Water Distribution Systems

F 1055-98?1                      Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter

Controlled Polyethylene Pipe and Tubing

F 1281-03                    Specification for Crosslinked Polyethylene/Aluminum/Crosslinked    Polyethylene (PEX-AL-PEX) Pressure Pipe

F 1476-95a                  Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

F 1974-04                    Standard Specification for Metal Insert Fittings for

Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked    Polyethylene Composite Pressure Pipe

F 2389-04                    Specification for Pressure-Rated Polypropylene Piping Systems

American Welding Society 550 N.W. LeJeune Road

P.O. Box 351040 Miami, FL 33135 AWS

Standard Reference Number   Title

A5.8-2004         Specifications for Filler Metals for Brazing and Braze Welding

Consumer Product Safety Commission 4330 East West Highway

Bethesda, MD 20814

CPSC

Standard Reference

Number                                  Title

16CFR Part 1500.44-2001     Method for Testing Extremely Flammable and Flammable Solids

Canadian Standards Association 178 Rexdale Blvd.

Rexdale (Toronto), Ontario, Canada M9W 1R3

CSA

Standard Reference

Number                                  Title

CAN/CSA B137.10M-02       Cross-linked    Polyethylene/Aluminum/Cross-linked

Polyethylene Composite Pressure Pipe Systems CSA America FC1-03                                    Stationary Fuel Cell Power Systems

Department of Labor

Occupational Safety and Health Administration c/o Superintendent of Documents

US Government Printing Office Washington, DC 20402-9325

DOL

Standard Reference

Number                                              Title

29 CFR Part 1910.1000 (1974)          Air Contaminants

29 CFR Part 1910. 1025 (2006)         Lead

Federal Specifications*

General Services Administration 7th & D Streets

Specification Section, Room 6039 Washington, DC 20407

FS

Standard Reference

Number                      Title

WW-P-325B (1976)   Pipe, Bends, Traps, Caps and Plugs; Lead (for Industrial Pressure and Soil and Waste Applications

*Standards are available from the Supt. of Documents, U.S. Government Printing Office, Washington, DC 20402-9325.

International Code Council 5203 Leesburg Pike, Suite 600 Falls Church, VA 22041-3401

ICC

Standard Reference

Number                      Title

IFC-06                        International Fire Code®

IFGC-06                     International Fuel Gas Code®

International Institute of Ammonia Refrigeration Suite 700

1101 Connecticut Ave., NW Washington, DC 20036

IIAR

Standard Reference Number   Title

2-99                 Fibrous Glass Duct Construction Standards Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems

Manufacturers Standardization Society of the Valve & Fittings Industry, Inc. 127 Park Street, N.E.

Vienna, VA 22180

MSS

Standard Reference

Number                      Title

SP-69-2003     Pipe Hangers and Supports-Selection and Application

North American Insulation Manufacturers Association Suite 310

44 Canal Center Plaza Alexandria, VA 22314

NAIMA

Standard Reference

Number                      Title

AH116-02                     Fibrous Glass Duct Construction Standards

National Fire Protection Association Batterymarch Park

Quincy, MA 02269

NFPA

Standard Reference Number   Title

30A-03             Code for Motor Fuel-dispensing Facilities and Repair Garages 31-06                        Installation of Oil-burning Equipment

37-06               Stationary Combustion Engines and Gas Turbines 58-04                        Liquefied Petroleum Gas Code

69-02               Explosion Prevention Systems

70-05               National Electrical Code (including TIA 05-2) (This edition is applicable only for one-, two-, and three-family dwellings)

70-08               National Electrical Code

72-07               National Fire Alarm Code

75-03               Protection of Information Technology Equipment

82-04               Incinerators and Waste and Linen Handling Systems and Equipment

85-04               Boiler and Combustion Systems Hazards Code

91-04               Exhaust Systems for Air Conveying of Vapors, Gases, Mists and Noncombustible Particulate Solids

92B-05            Smoke Management Systems in Malls, Atria and Large Spaces 211-06 Chimneys, Fireplaces, Vents and Solid Fuel-burning Appliances 262-02    Standard Method of Test for Flame Travel and Smoke of Wires

and Cables for Use in Air-handling Spaces

704-01             Identification of the Hazards of Materials for Emergency Response 853-03                        Installation of Stationary Fuel Power Plants

Sheet Metal & Air Conditioning Contractors National Assoc., Inc. 4021 Fafayette Center Road

Chantilly, VA 22021

SMACNA

Standard Reference

Number                      Title

SMACNA-05                HVAC Duct Construction Standards-Metal and Flexible SMACNA-03                                    Fibrous Glass Duct Construction Standards

Underwriters Laboratories, Inc. 333 Pfingsten Road

Northbrook, IL 60062-2096

UL

Standard Reference

Number                      Title

17-94                           Vent or Chimney Connector Dampers for Oil-fired Appliances-with Revisions through September 1998

103-01                         Factory-built Chimneys, Residential Type and Building Heating Appliance

127-96                              Factory-built Fireplaces-with Revisions through November 1999

174-04                         Household Electric Storage Tank Water Heaters

181-05                         Factory-made Air Ducts and Air Connectors

181A-05                      Closure Systems for Use with Rigid Air Ducts and Air Connectors-with Revisions through December 1998

181B-05                      Closure Systems for Use with Flexible Air Ducts and Air Connectors

207-01                         Refrigerant-containing Components and Accessories, Nonelectrical

268-96                         Smoke Detectors for Fire Prevention Signaling Systems- with Revisions through January 1999

268A-98                           Smoke Detectors for Duct Applications-with Revisions through September 2001

343-97                              Pumps for Oil-Burning Appliances-with Revisions through May 2002

391-95                              Solid-fuel and Combination-fuel Central and Supplementary Furnaces-with Revisions through May 1999

412-04                         Refrigeration Unit Coolers

471-06                         Commercial Refrigerators and Freezers

508-99                         Industrial Control Equipment

536-97                         Flexible Metallic Hose-with Revisions through June 2003 555-99      Fire Dampers-with Revisions through January 2002

555C-96                      Ceiling Dampers

555S-99                       Smoke Dampers-with Revisions through April 2003 586-96    High-efficiency, Particulate, Air Filter Units-with

Revisions through August 2004

641-95                              Type L Low-temperature Venting Systems-with Revisions through April 1999

710-95                         Exhaust Hoods for Commercial Cooking Equipment-with Revisions through April 1999

710B-04                      Recirculating Systems

726-95                         Oil-fired Boiler Assemblies-with Revisions through January 2001

727-06                         Oil-fired Central Furnaces

729-03                         Oil-fired Floor Furnaces

730-03                         Oil-fired Wall Furnaces

731-95                         Oil-fired Unit Heaters-with Revisions through May 2004 732-95       Oil-fired Storage Tank Water Heaters-with Revisions

through January 1999

737-96                        Fireplace Stoves-with Revisions through January 2000 762-03                                                Outline of Investigation for Power Ventilators for

Restaurant Exhaust Appliances

791-93                         Residential Incinerators-with Revisions through May 1998

834-04                         Heating, Water Supply and Power Boilers Electric

867-00                         Electrostatic Air Cleaners-with Revisions through May 2004

896-93                        Oil-burning Stoves-with Revisions through May 2004 900-94             Air Filter Units-with Revisions through October 1999 959-01      Medium Heat Appliance Factory-built Chimneys

1240-05                       Electric Commercial Clothes Drying Equipment

1261-01                       Electric Water Heaters for Pools and Tubs-with Revisions through June 2004

1453-04                       Electronic Booster and Commercial Storage Tank Water Heaters

1482-96                       Solid-fuel Type Room Heaters-with Revisions through January 2000

1777-04                       Chimney Liners

1820-04                       Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics

1887-04                       Fire Tests of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics

1978-05                       Grease Ducts

1995-05                       Heating and Cooling Equipment

2043-96                       Fire Test for Heat and Visible Smoke Release for Discrete Products and their Accessories Installed in Air-handling Spaces-with Revisions through June 2001

2158-97                       Outline of Investigation Electric Clothes Dryer-with Revisions through May 2004

2162-01                       Outline of Investigation for Commercial Wood-fired Baking Ovens-Refractory Type

2221-01                       Tests of Fire Resistive Grease Duct Enclosure Systems

Effective:                                                     01/01/2009

R.C. 119.032 review dates:                         07/01/2012

CERTIFIED ELECTRONICALLY

Certification

12/12/2008

Date

Promulgated Under:                           119.03

Statutory Authority:                           3781.10(A)

Rule Amplifies:                                  3781.10, 3781.11, 3791.04

Prior Effective Dates:                         7/1/82, 3/1/85, 3/1/86, 1/1/89, 9/1/92, 7/1/95, 2/1/96,

3/1/98, 7/1/98, 1/1/02, 1/1/04, 3/1/05, 9/6/05, 3/1/06,

7/1/07, 1/1/08, 3/31/08(Emer.), 6/24/08